How to Fix Remote Access to the Server Is Not Enabled

Video remote access to the server is not enabled windows 7

RDP error: Remote access to the server is not enabled

Remote Access to The Server is Not Enabled

Có thể bạn quan tâm

  • Nên cắm sạc pin vào ổ điện trước hay điện thoại trước?
  • Cách kết nối loa Bluetooth với tivi Samsung cực đơn giản, nhanh chóng
  • Hướng dẫn chi tiết cách thay đổi cài đặt âm thanh tin nhắn Zalo cực đơn giản
  • Cách xóa tin nhắn Zalo vĩnh viễn cả 2 bên cực đơn giản dễ dàng
  • Hướng dẫn cách đăng ký Twitter không cần số điện thoại nhanh chóng

What caused “Remote access to the server is not enabled”?

Remote access to Server is not enabled is a common RDP error in Windows 11/10/8.1/8/7 when you access a remote computer. Generally speaking, there are seven reasons that can cause the issue

Error caused by Windows update. As we all know, each update of the Windows version will fix some errors, but at the same time, also bring some new problems. Perhaps this is the reason why “Remote access to the server is not enabled”. Firewall setting error or impact of anti-virus software. Windows built-in firewall and third-party anti-virus software, in some cases, may cause the problem. Network configuration error. The connection of Microsoft Remote Desktop depends on the network. If your computer network configuration is wrong, it is likely to cause this problem. Remote Desktop setting error. If you reconfigure a new computer, you may need to check its settings to see whether Remote Desktop has been enabled. Group Policy setting error. Group Policy setting error. According to the feedback of some users, improper Group Policy settings may be the cause of this problem. Display setting error. If the screen size of your remote computer is too large, this problem may also occur. The culprit is custom scaling. Port conflict. If the port used by other applications on your PC conflicts with port 3389, it may also cause this problem.

Tham Khảo Thêm:  5 app số điện thoại ảo miễn phí, tốt nhất hiện nay

8 solutions to “RDP Remote access to the server is not enabled”

Based on the causes of the RDP remote access to the server is not enabled error, we sort out 8 solutions.

Solution 1. Modify Windows Firewall settings

Step 1. Press WIN + S and then type in “Allow an app through Windows Firewall”. Click Open.

Firewall

Step 2. Click Change settings and then check Remote Desktop.

Check Remote Desktop Windows 10

Solution 2. Check Allow Remote Desktop connections

Step 1. Press Win + R to invoke the Run dialog box. Then type in “sysdm.cpl” and hit OK to open System Properties.

Step 2. Switch to the Remote tab and then check Allow Remote Assistance connections to this computer.

Allow Remote Assistance Connection

Solution 3. Reset the Remote Desktop credentials

Step 1. Press WIN + S and then type in “Remote Desktop Connection”. Click Open.

Remote Desktop Connection

Step 2. Click Delete, and then click Yes to delete the saved credentials.

Delete RDP Ccredentials

Solution 4. Add the IP address of the remote computer to the host’s file

Step 1. Press Win + X, and then select Windows PowerShell (Admin).

Step 2. Type in the following commands and press Enter respectively:

cd C:/Windows/System32/Drivers/etc

notepad/hosts

Notepad Hosts

Step 3. Add the IP address of the remote computer. Click Close and then Save to save all changes.

Solution 5. Add RDGClientTransport key in the registry

Step 1. Press WIN + R and then type in “regedit” to open the Registry Editor.

Step 2. Navigate here: HKEY_CURRENT_USER > SOFTWARE > Microsoft > Terminal Server Client. On the right pane, click on the blank space and then choose New > DWORD (32-bit) Value.

Tham Khảo Thêm:  3 Ultimate Ways to Copy Slides in PowerPoint (Step-by-Step)

Terminal Server Client DWORD

Step 3. Change the name of the new DWORD into “RDGClientTransport”.

New Name of DWORD

Step 4. Set the value data to 1.

Solution 6. Change network properties

Step 1. Press Win + I and then click Network & Internet.

Network and Internet

Step 2. Click Properties.

Network Status

Step 3. Change the Network profile from Public to Private.

Solution 7. Check the Group Policy setting

Step 1. Press Win + R and then type in “gpedit.msc” to open Local Group Policy Editor.

Step 2. Navigate here: Computer Configuration > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Connection. On the right pane, find and click Allow users to connect remotely by using Remote Desktop Services.

Allow Users to Connect Remotely by Using Remote Desktop Sevices

Step 3. Set it to Enabled.

Allow Users to Connect Remotely Using Remote Desktop Services

Solution 8. Update or recover the system version

Step 1. Open the Control Panel, locate, and click Update & Security.

Find Updates and Security

Step 2. In the Update & Security interface, check whether a new version is available. If yes, download and install it (remember to back up your data first).

Update Windows Version

Step 3. If your computer system is already the latest version, you can consider to Go back to the previous version of Windows 10 in Recovery (choose carefully).

Restore the Windows Version

The best alternative to RDP [quick setup and easy operation]

Sick of changing Windows settings for using RDP? Try a free third-party remote access software, AnyViewer. It doesn’t requires you to configure firewall settings and router even when accessing a computer from a different network. It supports unattended remote access, attended remote access, and file transfer between PCS. To offer remote support more effectively, it enables you to chat with the one on the other end in a remote session.

Tham Khảo Thêm:  5 mẹo sử dụng ứng dụng máy tính trên iPhone chuyên nghiệp không kém máy tính cầm tay

System requirements:

  • The PC to be accessed – All versions of Windows 11/10/8.1/8/7 and Windows Server 2022/2019/2016/2012 R2.
  • The device that you start remote access – All versions of Windows 11/10/8.1/8/7 and Windows Server 2022/2019/2016/2012 R2, iSO 10.0 and later versions, or Android 6.0 and later versions.

Step 1. Click the button to download AnyViewer, install, and run AnyViewer on both devices.

Step 2. Go to Log in, and then click Sign up to create an AnyViewer account. (If you already have signed up on its official website, you can log in directly.)

Log in AnyViewer

Step 3. Log in to the same account on other devices. All the logged-in devices will be assignedto the account and listed on My devices list.

Free Editions

Step 4. Go to Device to select the target device you want to connect to, and then click One-click controlto achieve unattended remote access.

Connect to My Devices

Note: AnyViewer offers advanced plans. Upgrade your account and enjoy advanced features, like connecting in privacy mode, and assigning more computers for one-click unattended remote access & power remote management (Lock, Reboot, Shutdown)

Conclusion

If you run into the problem “Remote access to the server is not enabled”, try one of the eight remedies listed in this post. If none of the methods work, you may want to consider using third-party remote connection software to avoid the issue. AnyViewer, a completely free third-party remote control software, is an excellent example.

Viết một bình luận